Home | Contact Us | Warranty Registration | About Us | Parts | Service & Repair                                                     


Motorcycle
Automotive
Wrist Watches
Where To Buy
Close Outs
FAQ's
Become a Dealer

 

Pin It  





Pin It  


 

PARTS N' PIECES

Replacement Parts and Refurbishment Tools

Did you know that any time or temperature instrument requires periodic service to keep it running at it's peak and to insure proper water resistance?  Any instrument with rubber o-rings should be replaced every time you change your battery (clock) or every 3-4 years (thermometers).  Any rubber o-ring over time hardens and looses its ability to seal the case back to the case - it can even become torn or lost completely if you have removed the instruments back cover for any reason during your ownership.  This o-ring service and maintenance is critical, not only for your Formotion instrument, but even that expensive wrist watch from Rolex you may be wearing.  All gauges of this nature must be serviced regularly to operate consistently and well.
 

Does your clock have 6 small notches on the back case cover?
How to change the battery on a Formotion GA or BP style clock.


 

PowerPod Replacement Cigarette Lighter element with handle.  Fits all PowerPod versions including 2.0 and earlier. $10.00 Ea - 2 for $15.00
EL Replacement Light Transistor Modules.  Has your old EL Clock lost it's glow?  A simple replacement of its 2 battery transistor module inside will get that EL light back up and glowing.  No returns on electrical parts. $19.00

 

Sticky Disk Case Back.  Replacement Stainless Steel Case back.  No Stem.  Fitted with 3M VHB Sticky Disk.  For stick-on case back replacement or conversion from Stem Back to Sticky Back. $12.00
Stem Back and Beauty Ring.  Full OEM replacement screw on backs with female threaded stem (includes beauty ring).  Fits all GA and BP Gauges.  Used as a replacement or to convert stick-on to Bolt-on.  Polished Stainless Steel. $18.00
"Velcoin" Velcro kit for your stick-on Formotion gauge.  Direct replacement for the standard stick-on pad.  Allows for easy on and off gauge removal for battery changing or maintenance.  Comes with two 1 3/8" round "sets" hook and loop pads. Reduced shipping when ordering this item alone.  Ships via USPS. $5.00
Sticky-Disk Replacement Pads - 3 to a kit.  Small Size:  Fits Spot Clocks $3.00
Sticky-Disk Replacement Pads - 3 to a kit.  Medium Size:  Fits all BP and BPL Stick-on Clocks and Thermometers $3.00
Sticky-Disk Replacement Pads - 3 to a kit.  Large Size:  Large 3M Sticky Pads for use with SL/IP/Flat Mounts/ Multi Mounts etc. $3.00
Mounting Bar LARGE Chrome LARGE 50mm x 2mm  (Stock Replacement Bar) $5.00
Mounting Bar SMALL Brushed SMALL 33mm x 1.5mm $5.00
Mounting Bar SMALL DOUBLE THICK Brushed (DOUBLE THICK) SMALL 33mm x 3mm $5.00
Modding Mount.  (as shown on Homepage)  Mounts and Presents any "GA" Bolt-On Formotion Gauge in virtually any angle or position.  Perfect for angled windshields, dashboards, ceiling mounting, desk mounting or side view angle mounting. 2 pivot points plus full gauge dial rotation.   (Note: Can be used with our stick-on "BP" series gauges as well, but you loose the ability to rotate the face dial once mounted to the Modding Mount.) $14.95
O-Rings: For All GA or BP Series Gauges and EL Series - 3 to a pack.  Choose size or model at checkout. $3.00
Replacement Beauty Ring (Not for EL Gauges or Police SL Models) $10.00
Screw Kit: Qty 1 M4x8, 1 M4x16, 1 Hex Key $3.00
Spanner Wrench For Case Back Opening.  Fits all Formotion Screw Back Cases INCLUDING PSL and RSL Clocks. $12.00
Case Vise: Used to hold your Formotion gauge (including PSL and RSL Gauges) securely for all case back opening.  For use with the Spanner wrench above. $12.00
Battery SR626SW For all 2035 and Super 2035 Citizen Movements $4.29
Battery SR927SW For Police SL with Swiss Movements $5.29
Complete Refurbishment Kit: If your gauge has 6 slots on its back cover, this kit will work with it! Includes 2 O-Rings, 2 Sticky Pads, 1 SR626sw Battery, 1 Spanner Wrench, 1 Case Vise.  Not For PSL or RSL Clocks.  NOTE:  Purchase and use of this kit to service your gauge yourself does not meet the warranty requirements for Formotion's Limited Liftime Warranty. Read below: "Maintenance and Refurbishment Services" opening paragraph for details or our complete warranty information here. $24.95

 


 Maintenance and Refurbishment Services

In order to keep your Formotion Limited Lifetime warranty valid and in effect, it's required that the gauge be serviced every three years with our Signature In-Warranty Service (see below for details) (which coincides with needed battery replacement on clocks).  If your gauge is not covered under our Lifetime Warranty OR something happens to you gauge that is outside of the warranty (dropping it on the cement floor while installing it for example), we have you covered as well with our refurbishment repair service. (see below for details)  To see a full description of our warranty see below.

 In-Warranty "Service"

Choose this service if your gauge was purchased AFTER July 31, 2012 or you've had a refurbishment repair done after that date.  This every three year service keeps your Formotion gauge running at it's very best.  The gauge will be completely inspected and cleaned from top to bottom.  All seals will be replaced, internals cleaned and lubricated and a fresh new battery installed (clocks).

INSTRUCTIONS:  Click the "Add To Cart" button and adjust the "quantity" section on the order page for the number of gauges you are sending in for servicing.  Send your gauge postage pre-paid via any carrier of your choosing and a copy of your e-mail receipt to our offices at:

Formotion Service Center
3039 Kilgore Road STE 150
Rancho Cordova, CA 95670


$15.00 Total
(No Added S/H Return Fee)

Please allow up to 2 weeks for servicing turnaround.  If you call in to check on your service, please refer to your order number from your e-mail receipt you received at ordering.  Formotion can not be responsible for lost or stolen gauges in transit "to" our repair facility.

 Refurbishment "Repair"

 Choose this service if your gauge was purchased BEFORE July 31, 2012.  If your gauge is outside of it's warranty, its original warranty expired or something happens to your gauge that is not covered under its warranty (dropping it on the cement floor while installing it for example) For $25.00 + $10.00 Shipping and Handling, let Formotion do all the work and do it right!  We'll refurbish your Formotion gauge to new like status.  This includes any and all problems with your gauge - broken lens, seal, dead battery, stem broken, hands broken etc.  If we can't fix it, we'll send you a brand new unit as a replacement.  Note: If a replacement gauge is necessary, Formotion will do everything in it's power to replace it with the same model - however, we reserve the right to substitute or change models due to out of stock or discontinued styles. We'll of course communicate this with you prior to working on your gauge.

Here's the good news ... all Refurbishment gauges are automatically upgraded to our Limited Lifetime Warranty.  That means that as long as you meet the servicing requirements once every three years from the date of your refurbishment, we'll cover that gauge for life!!  See a full description of our warranty below.

INSTRUCTIONS:  Click the "Add To Cart" button and adjust the "quantity" section on the order page for the number of gauges you are sending in for servicing.  Send your gauge postage pre-paid via any carrier of your choosing and a copy of your e-mail receipt to our offices at:

Formotion Service Center
3039 Kilgore Road STE 150
Rancho Cordova, CA 95670


$35.00 Total
($25.00 + $10 S/H Return Fee)

VisTrek SOLAR Models ONLY
SB-91000 & SB-92000

$55.00 Total

Please allow up to 2 weeks for servicing turnaround.  If you call in to check on your service, please refer to your order number from your e-mail receipt you received at ordering.  Formotion can not be responsible for lost or stolen gauges in transit "to" our repair facility.

 

 


Replacement Batteries
WAC5150 - Sony SR626SW replacement battery

Fits all GA, BP, IP, EL (movement only) and Spot Clocks

WAC5150.jpg
Click To Enlarge

These button cell batteries pack a lot of power into a tiny package. They provide maximum power for your wristwatch, calculator, or other small electronics. These batteries are packaged for individual sale, with one battery per card.

SPECIFICATIONS
  Weight:   0.01 pounds
  Width:   0.26 inches
  Height:   0.09 inches
  Chemistry:   SILVER OXIDE
  Voltage:   1.50
  Termination:   NO TERMINALS, PLAIN CELL


$4.29 EA

NOTE:  Shipping VIA USPS is included in battery Replacement Orders.

 

Copyright 2000 - 2006 - Formotion® is a registered trademark of Formotion Products Inc. 
iPod ® is a registered trademark of Apple Corporation.
Products Protected by Patent No. D497557
Photos by Peter Harvey

       Get On Our Mailing List

We Accept The following Credit Cards and Personal Checks On-Line

Formotion Products Inc.
is a Proud Member of: