|
Our Very Best - A
Formotion Classic Design!
All Signature Series Formotion Gauges represent the finest
clocks and thermometers available today for any motorsport
application. Signature Series gauges are 100% 316L
Stainless Steel inside and out for years of carefree
service.
Movements
Get the Real Deal!
Make Sure It Says
On The Dial!
One of the first practical
applications of radioactivity was the use of radium for
the excitation of zinc sulphide crystals to make them glow
in the dark. The radiation energy of the isotope was
transformed by the so-called "phoshors" (ZnS) into visible
light. Until the early seventies radium luminous compound
was widely used by the timepiece and aviation instrument
industry.
Realizing the risk of radium, RC
Tritec started in the late fifties to develop a new
self-luminous compound activated by tritium to replace
radium completely. With its very low radiotoxicity and
leaving no direct radiation outside of the watch, tritium
luminous compound was considered to be "the really safe"
alternative. 30 years later, in the early nineties,
Superlite® and Super-LumiNova® were developed and
immediately introduced to the world-wide watch industry.
Formotion's
use of RC Tritec's Super-LumiNova® afterglow / photoluminescent pigments represent the
latest, innovative development in the field of non-radioactive lighting
for the watch industry. Based on their extremely improved light storing
capacity these new pigments are now being used for night markings on our
Night Vision watch
dials with fantastic results. Long afterglow or photoluminescent pigments operate like a "light battery".
After sufficient activation by sunlight or artificial light they emit
light in the dark for many hours and can remain visible for the
whole night. This activation and subsequent light emission process can
be repeated again and again, and the material does not suffer any
ageing. Nothing else on the market even comes close!!!
Independent Glow Study Results:
The luminosity performance of the Formotion Super LumiNova™ gauges
based on DIN 67510 activation testing standards (5 min / 1000 LX
with Osram Ultravitalux (simulating sunlight)) and determined the
light intensities accordingly: the visibility level of 0.3 mCd/m2
= 30 nCd/cm2 is maintained for more than 8 hours.
We
are proud to Announce:
Bolt-On Mount Gauges
Awarded Design Patent
No. D497,557
October 26, 2004
See the Patent Award Here in PDF
Mount 'em on your bars!
CLICK TO ENLARGE
Don't forget to pick up one of our new
Handlebar Mounts for your new Clock or Thermometer!
NOW AVAILABLE FOR 1.25" BARS!
|
316L
Highly Polished Stainless Steel Case /
316L
Highly Polished Stainless Steel Case /
316L
Highly Polished Stainless Steel Case /
316L
Highly Polished Stainless Steel Case /
